|
Basic Super Comp
Dragster
$11,250.00
S/C CHASSIS INCLUDES:
- Wheelbase
Set to Customer requirements
- 4130
Chromoly fixture Welded Chassis
- 'A' Frame
Welded Front End
- SPE
Spindles
- SPE Rack
& Pinion Steering Box
- Steering
Linkage
- Steering
Column
- Polished
Aluminum Steering Wheel w/grips
- Quick
Release Steering Hub
- Front to
Rear body Panels w/Formed Aluminum Nose Piece
- Floor Pan
- Entry/
Exit Assist handles
- Lower Aero
Lip
- Lexan
Windscreen
- Aluminum
Front and Rear Protection Plates
- Strange
Aluminum 9" Ford
- Rearend
Housing
- Strange
Engineering 35 Spline Axles w/bearings
- 5/8"
Axle Studs Fill & Drain Plugs on Rearend Housing
- Anti-rotation
Device
- Light
Weight DZUS Tabs
- Aluminum
DZUS buttons
|
- Lateral
Engine Limiters
- Front
Ballast Mounts
- Adjustable
throttle Pedal and Mount
- Adjustable
Brake Pedal and Mount
- Wilwood
Master Cylinder and Mount
- Brake Line
Tab
- Aluminum
Fuel Tank w/Fittings & Mount
- Fuel Pump
Mount
- Parachute
Mount and Anchor
- Parachute
Handle and Mount
- Ignition
Plate and Mount
- Tach &
Gauge Mounts
- Switch
Panel
- Battery
tray
- Master
Disconnect Switch Mount
- Aluminum
Seat w/Seat belt Slots
- Seat Belt
& Shoulder Harness Mounts
- Aurora Rod
ends
- Grade 8
Bolts Used Throughout
- Front
& Rear 1/4" 6061-T6
- Aluminum
Engine Plates
- Tow Hooks
- FINANCIAL
TERMS:
- 50%
Down
- 50%
Upon Completion
|
Options for Super
Comp Dragster
- Wilwood
Rear Disk Brakes w/o Drilled Rotors..$420.00
- Wilwood
Disk Brakes w/Drilled Rotors.....$440.00
- Route
Brake Lines Inside Frame Rails ...$100.00
- Large
Capacity Fuel Tank ....$100.00
- 9"
strange engineering Aluminum Nodular iron Center Section, Coupler
& Choices of 4:10, 4:30, or 4:56 Std. Gears $1199.00
- Strange
Engineering add For Aluminum Spool ..$50.00
- Gun
Drilled Rear Axles...$125.00
- Powder
Coat seat, floor and Bulkhead...$100.00
- Powerglide
to engine Adapter Plate for Chrysler, Ford, etc .$145.00
- CC Shifter
Air or Elec.& Mount..$270.00
- Parachute
& Throttle Cable w/ends...$57.00
- Shifter
Cable w/ends
- Aluminum
Radiator & Electric Fan $529.00
- Wheelie
Bars (60" long)..$250.00
|
- Magnesium
body Panels Add...$1200.00
- NACA duct
Each Installed (Large)...$70.00
- NACA duct
Each Installed (Small) ...$50.00
- Master
Disconnect Switch...$26.50
- Rear Wing
(16" x 42")...$550.00
- Rear Wing
Mounts..$675.00
w/Streamline tube Struts
- Chassis
Paint (Black)..$350.00
- Assemble
Chassis After Painting..$200.00
- Chrome
Misc. Parts...P.O.R
- Goodyear
Front & Rear Tires- any size...P.O.R
- Chassis
Stabilizer...$199.00
- SFI
Chassis Certification...P.O.R
- Simpson
Belts ..P.O.R
- Simpson
Chute...P.O.R
- VDO or
Autometer Gauges...P.O.R
- Radiator
Mount...$100.00
- Aluminum
Spindles Add...$50.00
- Removable
Front 'A' Arms Add...$100.00
- Hardwood
Scoop (Customer Choice) & Mount....$250.00
|
Basic Comp Dragster
$13,000.00
COMP CHASSIS
INCLUDES:
- STREAMLINE
FRONT END
- ALUMINUM
RACK AND
- PINION
STEERING
- ALUMINUM
SPINDLES
- ALL
STEERING LINKAGE. ETC.
- STEERING
WHEEL MOTOR PLATES AND MOUNTS
- FRONT AND
REAR PROTECTION PLATES
- FABRICATED
9" HOUISING W/OLDS ENDS
- COMPLETE
BODY AND FRONT NOSE
- ALUMINIIM
SEAT
- FLOOR PAN
- MASTER
CYLINDER MOUNT
- ALL DZUS
TABS
- SEAT BELT
MOUNTS
- DASHBOARD/GAUGE
MOUNTS
- PARACHUTE
MOUNTS
- ADJUSTABLE
PEDALS- GAS AND BRAKE
- LEXAN
WINDSCREEN- TOP FUEL TYPE
- FUEL TANK,
MOUNTED
|
FEATURES:
- 4130
TUBING
- 6061 T-6
ALUMINIIM MOTOR PLATES
- SIX POINT
ROLL CAGE
- HELI-ARC
WELDING
- TOTAL
FRONTAL AREA CUBIC FT. 11.4
- LOWEST
DRAG COEFFICIENT AVAILABLE BY ANY CHASSIS MANUFACTURER
- FINANCIAL
TERMS:
- 50%
Down
- 50%
Upon Completion
|
|
Basic Front
Engine Dragster
$11,250.00
|
FED
CHASSIS INCLUDES:
- Wheelbase
to Customer Requirements
- 4130
Chromoly Fixture Welded Chassis
- All
Chassis to Current SFI Spec
- A
Frame or Tube Front Axle.Your Choice
- SPE
Spindles
- SPE
Billett Steering Box
- Steering
Linkage With All 4130 Rod Ends
- Polished
Alum Steering Wheel With Grips
- Quick
Release Steering Hub per SFI Spec
- Shorty
Body With Lexan or Aluminum Windscreen
- 9"
Ford or 8 3/4" Chrysler Rear End
Housing...Your Choice with Olds Housing Ends
- Overflow
Tank
- Strange
Engineering 35 Spline Axles With Bearings
- 5/8
Wheel Studs
- Fill
and Drain Plugs on Rear End Housing
|
- Anti
Rotation Device
- Aluminum
Front and Rear Motor Plates for Chevy or 392
Chrysler....Other Motor PlatesAvailable
- Light
Weight Aluminum DZUS Buttons
- Light
Weight DZUS Tabs
- Front
Ballast Mounts
- Throttle
Pedal
- Brake
Handle or Pedal...Your Choice
- Wilwood
7/8 Master Cylinder with Mounts
- Aluminum
5 Gallon Fuel Tank
- Parachute
Mount and Anchor
- Aluminum
Hand Formed Seat with Seat Belt Slots
- Tow
Hooks
- Parachute
Handle
- Roll
Cage Loop Can Be Single Bend "Round"
Loop or Double Bend "Square"
- Loop...Your
Choice
- FINANCIAL
TERMS:
- 50%
Down
- 50%
Upon Completion
|
|
|
Options for
Front Engine Dragster
|
Clutch
Pedal With Linkage for Crowerglide
Clutch Pedal With Linkage for Pedal Clutch
SPE 35 Spline Floaters Add (Installed)
Wilwood Calipers for Above Floaters with pads
Add for Large Capacity Nitro Fuel Tank with 1 1/2"
Aluminum Line
Add for Full Hand-Formed Alum. Body from Nose to in Front of
Motor
Add for Mag Body with Aluminum Nose and Panel in Front of
Motor
Front Canard Wings
Rear Canard Wings Two Stage
Computer Mount
Access Doors Installed (Each)
NACA Ducts Installed (Each)
Wilwood Brakes complete, Drilled for Standard Flange Axles
System 1 Remote Mount Oil Filter Installed
Throttle Cable With Ends
Chute Cable With Ends |
$110.00
$210.00
$1200.00
$210.00
$200.00
$950.00
$1950.00
$450.00
$850.00
$60.00
$75.00
$50.00
$440.00
$210.00
$75.00
$45.00 |
Other options
available for any chassis type. Please call with your needs or
requirements
New
4-Link Option (add to the base price of any listed above)
$4000.00
-Includes Strange double adjustable shocks, 4130 rod ends, tabs,
brackets, track locator, and anti-roll bar. Can be
retro-fitted to older cars. Price quoted per car. |
The following is a list of
the manufacturers we are WD with.
Please call for prices that are super competitive.
|
MANUFACTURER
Autometer
X R P
Goodyear
Hardwood
Jesel
Lenco
Monocoque
F K
Racepak
Strange Engineering
Crow Enterprises
Chute Metal
System 1
Wilwood
Mark Williams Ent.
Dedenbear
Meziere
Neil and Parks |
PRODUCTS
Gauges
Hose and Fittings
Racing Tires
Fiberglass Scoops
Valve Trains
Driveline components
Racing wheels
Rod Ends
Computers
Driveline Components
Seat Belts
Parachutes
Filters
Brakes
Driveline Components
Electronics
Water Pumps Complete line of tubing bends and
Brackets to build your own car |
All prices subject to
change without notice.
Prices are FOB Burlingame, KS.
P.O.R.= Price On Request.
|
